Burglar Alarms

Programming

Keyfob Programming for Banham Anno Panel

 

Keyfob Programming for G2 Xpander Range 1

 

Keyfob Programming for Banham App Panel

 

How to Programme a Keyfob for a Banham Anno Panel:
  1. Press ‘D’, then enter the Master Manager Code
  2. Press ‘NO’ twice to skip to ‘CHANGE CODES?’
  3. Press ‘YES’ three times to skip to ‘ENTER USER CODE’
  4. Present your key fob to the keypad (press it against the Banham Group logo). You will hear a short bleep and the display will show (6) asterisks within brackets
  5. Press’ YES’ twice and then use the ‘ABCD’ buttons to choose the preferred areas to be controlled by that key fob
  6. Press ‘YES’ twice, then ‘1’ for ‘FLEXI SET’
  7. Press ‘YES’ and use the number pad to enter a user name, pressing ‘D’ to confirm each letter. Finally, press ‘YES’ to confirm the user name. Note: use ‘B’ to move back and ‘C’ to clear
  8. to Add more users press ‘YES’ otherwise press ‘NO’ four times and then ‘A’

 

How to Programme a Keyfob for a Banham G2 Xpander Panel:
  1. Press ‘D’ and enter the master manager code when prompted
  2. Press ‘NO’ twice to skip to ‘Change Codes’, then ‘Yes’ to ‘Change User Codes’
  3. Now press ‘D’ until you arrive at an ‘Empty’ slot or type in required number
  4. Press ‘YES’ and then hold the new FOB against they keypad
  5. Press ‘YES’ to confirm ‘User Code’ and again to confirm ‘User Type’
  6. Select the ‘User Areas’ required (in the instructional video, ‘A’ and ‘B’ are selected), then press ‘Yes’
  7. Press ‘YES’ to set ‘User Options’ then ‘D’ and ‘Yes’ for ‘Flexi Set’
  8. Use keypad to enter name pressing ‘D’ to confirm each letter
  9. Press ‘YES’ to confirm name
  10. To add more users press ‘D’, or to exit press ‘No’ three times to return to ‘Change Codes’, then press ‘A’

 

How to Programme a Keyfob for a Banham App Panel:
  1. Press ‘D’, then enter the master manager code
  2. Press ‘NO’ three times to skip to ‘Edit Users?’
  3. Press ‘YES’ three times to skip to ‘Enter User Code’
  4. Present your key fob to the keypad (press it against the Banham Group logo) You will hear a short bleep and the display will show (6) asterisks within brackets
  5. Press ‘YES’ twice and then use the ‘ABCD’ buttons to choose the preferred areas to be controlled by that key fob
  6. Press ‘YES’ twice to set ‘User Options’, then ‘1’ for ‘Flexi Set’
  7. Press ‘Yes’ and use the number pad to enter a user name, pressing the right arrow to confirm the user name. Note: use ‘B’ to move back and ‘C’ to clear
  8. To add more users press ‘YES’ otherwise press ‘NO’ four times and then ‘A’

 

Find the PDF Guide here.